Instantaneous electric water heater for a shower for a summer residence

Instantly get hot water at the outlet from the tap allow instantaneous water heaters. The devices are used in apartments, dachas, production, in general, wherever there is running water and electricity. There are also natural gas water heaters. However, such models cannot be installed on their own without a representative of the gas company and registration of the relevant documents. Now we will talk about choosing an electric instantaneous water heater for shower to the dacha, since this device is the best option for obtaining hot water without unnecessary problems.

Requirements for electric instantaneous water heaters

Manufacturers offer many models of instantaneous water heaters. All of them differ in power, water throughput, heating element design, equipment, etc. The only thing in common in these devices is that they are all powerful and require connection only to a reliable electrical network.

Attention! A working water heater should not overload the household power grid. Otherwise, it threatens to burn out the wiring.

If you choose a shower water heater, then a model with a water flow rate on a watering can within 6 l / min is optimal. When using a shower in winter, you need a lot of power from the device. At this time of the year, the water temperature in the main line is about +5aboutC. To heat it up for bathing in the shower, you need a pressure water heater with a capacity of 13 kW or more. A single-phase network will not cope with this, and you will need to connect to a three-phase line.

Not every owner of an apartment or cottage can boast of having a 380 volt network, so non-pressure water heaters are the best option for domestic needs. The power of such devices ranges from 3 to 8 kW, and they work without problems from a single-phase network. When choosing a water heater for a summer cottage for a shower, it is better to give preference to a model with its own shower head.

Important! Regardless of what power an electric water heater has, it is connected only through a separate line to the switchboard.

Before buying an instantaneous water heater, you need to find out:

  • what ultimate load the home power grid can withstand;
  • is it possible to conduct a three-phase network into an apartment or a summer cottage;
  • for which model of the water heater the parameters of the water supply are suitable (the constant pressure in the line is taken into account).

In the apartments of modern houses, you can put an electric boiler of any capacity, even a pressure model of a water heater. According to existing standards in new buildings, the power grid is designed to connect equipment with a capacity of up to 36 kW. For giving in the shower, only a free-flow device with a power of up to 8 kW is suitable.

How does an instantaneous water heater work?

In storage water heaters, water is heated inside the tank from an electric heating element. Flow-through devices are similarly equipped with a spiral or heating element, only they heat the liquid during its movement. Despite the high power of the electric heater, flow-through models are sometimes more profitable to use than storage counterparts. The fact is that the heating element consumes electricity when the water is parsing. In the storage tank, the heater periodically turns on around the clock, even if there is no water sampling.

The heart of the flow-through device is a hydro-relay. From it comes the command to turn on or off the heating element, which depends on the speed of the water flow. The hydraulic relay is adjusted to operate at a water flow rate of 2 to 2.5 l / min. If this value is less, heating does not take place. This function protects the device from burning out the heating element.

Any instantaneous water heaters powered by electricity are divided into two types:

  • Electronic models heat water to the specified parameters, regardless of its initial temperature, flow rate and pressure in the pipeline. Water is heated by changing the power of the heating element.
  • For hydraulic models, the power of the heating element depends on the listed parameters. With an increase in water consumption, its temperature at the outlet of the tap will decrease.

All these subtleties of the device of instantaneous water heaters must be taken into account when choosing the optimal model for a shower.

We calculate the power of the instantaneous water heater

Professionals use complex formulas for calculating the optimal power of the device. At home, in order to choose the right model for the shower, we will perform the simplest calculation:

  • The first step is to determine the approximate water consumption at the draw-off point where the heater is supposed to be installed. At the beginning of the article, we already found out that the optimal flow rate for a shower is 6 l / min. For reference, the consumption in other taps: washbasin - 4 l / min, bathroom - 10 l / min, kitchen sink - 5 l / min.
  • Next, we will use the formula to calculate the power of the electrical appliance P = QT / 14.3. Instead of Q, we substitute the value of the water flow. T is an indicator of the temperature difference, which is in the range of 30-40aboutFROM.

It is possible to go in the calculations in another simple way. It consists in multiplying the water flow rate by 2 or 2.5.

Pressure and non-pressure models

Initially, we touched a little on the topic of pressure and non-pressure water heaters. Now is the time to take a closer look at them. Since a free-flow model is suitable for a shower in the country, we will start with it.

Non-pressure type devices at the inlet are equipped with a shut-off device that neutralizes the excess pressure of the water supply network. The water pressure inside the water heater is similar to atmospheric pressure. At the outlet of the device, it is not allowed to install any locking mechanism that interferes with the free flow of water. The heating of the moving liquid occurs even with pressure drops in the water supply system, but if it reaches a critical level, the heater turns off.

Important! A self-installed tap at the outlet of a non-pressurized water heater can cause damage to the electrical appliance.

The free-flow shower models are equipped with a hand shower connected via a flexible hose. Moreover, the device of the watering can is slightly different from the analogs used in traditional shower systems. Special small holes create strong jets of water, even if the pressure in the water supply is below normal.

Advice! If a decrease in the thickness of the streams of water is visually noticeable, it means that the holes of the watering can are overgrown with a hard coating. This often happens when using hard water. You can clean the watering can with any store-bought product that dissolves stone deposits.

The main advantage of free-flow devices is the ability to connect to a home two-phase network. In the country, the device can be installed not only in the shower, but also in the kitchen. In apartments, free-flow water heaters are rarely used due to their low power.

Pressure type water heaters work according to a different principle. The devices at the inlet and outlet do not have shut-off devices. Installation takes place by inserting into the water supply. Typically, a pressure heater is installed in front of the faucet of a sink, bath or washbasin. Installation of the device on several water points is allowed. The main thing is that the distribution of the water supply system allows it to be done.

Pressure water heaters are very powerful, due to which they manage to heat a large amount of water.An electronic on / off system as well as overheating protection controls the entire operation of the device. At the outlet, the water is always maintained at a given temperature.

Several recommendations for the use of instantaneous water heaters

So, we have decided on the model of an instantaneous water heater, now we need to find out how to use it. An instruction should be included with the product, but a few additional tips from specialists will not hurt.

When choosing the place of attachment of the flow-through device, the following nuances are taken into account:

  • It must be remembered that the device is powered by electricity and for safety it must be protected from splashing water. At the same time, it should be as close to the shower stall as possible.
  • If the device is designed for different operating modes, it is hung up so that it is convenient to reach it with your hand for switching.
  • The optimal installation site is considered to be the area where it is easiest to connect the device to the water supply and the mains.

In most regions of our country, the water is hard. During heating, solid accumulations form on the walls of the device and the heating element, reducing the throughput. Installing a filter in front of the water heater will help to avoid this problem. Otherwise, the device will have to be periodically removed for cleaning, if its design allows it.

Attention! After installing the instantaneous water heater, water is first let through it, and then voltage is applied. Reversing the process will damage the instrument.

Recommendations for choosing an instantaneous water heater

An electric water heater must 100% cope with the task. So that the purchased device does not disappoint you, we suggest that you familiarize yourself with a few tips for choosing a model:

  • When using a shower in the country only in the warm season, the power of an electrical appliance of 3.5 kW is sufficient. Provided that water is taken with a temperature of 18aboutFrom the outlet, a hot liquid will be obtained with a flow rate of 3 l / min. For bathing in the shower with the onset of cold weather, it is optimal to purchase a water heater with a capacity of 5 kW or more.
  • When choosing an electrical appliance, it is necessary to evaluate the stability of the water supply pressure. Otherwise, everything will end up with a quick breakdown, or the water, in general, will not heat up.
  • It is important to immediately determine how many taps the device is designed for. If they are far from each other, it is wiser to buy several devices of lower power. They are installed directly near the draw-off point.
  • In the shower to the country, they choose models with the highest degree of electrical safety. In any case, at least a little spray will fall on it, and during the adjustment you will have to take it with wet hands.

In the last place is the price of the product, because you cannot save on your own safety by buying devices of unknown origin.

The video tells about the choice of a water heater:

Having decided on an independent installation of a water heater, you need to familiarize yourself with the elementary rules of electrical safety, and use the device only in accordance with the recommendations of the manufacturer.

Give feedback

Garden

Flowers

Construction