How bees hibernate in plastic hives

Wintering of bees in hives, more precisely, preparation for this period is a crucial moment, which begins at the end of the honey season. Wintering, depending on climatic conditions, lasts from 2 months to six months. In order for the bee colonies to come out healthy by the spring, it is necessary to properly organize wintering and carry out timely care. The condition of the bees and the successful exit from hibernation depend on regular monitoring of bees in winter.

What bees do in winter in hives

On warm days, you can monitor the vital activity of bees, but from November to March they become less active, do not fly out of the hive and consume a small amount of food.

With the onset of winter, the bees begin to carefully plug the cracks, insulate the walls with propolis, and make the exit as narrow as possible. Such painstaking work will protect the bee colony from cold weather and precipitation.

After the work done, the insects gather in a dense living ball, which on the outside is formed by motionless old bees, and the inside is formed by live young bees. With constant movement, bees release energy and thereby create the temperature necessary for life.

The winter ball is located near the chute to regulate the flow of air and remove carbon dioxide from the hive. When the temperature rises or falls, the bee ball expands or contracts. If in winter it is sunny, calm weather, bees fly out of the hive and circle over the apiary, making a cleansing flight.

Regardless of the air temperature outside, in the hives the temperature is stably kept within + 17 ° C.

Once a week, it is recommended to listen to the hives, since the state of the bee colony can be determined by the hum of the bees:

  • quiet, even hum - the wintering of bees in the hive is favorable;
  • barely audible rustle - speaks of the weakening of the family, in this case, additional feeding is necessary;
  • in the absence of movement, the bee colony is considered dead.

At the end of February, the activity of the bees increases, as it is necessary to raise the temperature in the hive for successful egg laying. At this time, you need careful care and additional feeding.

Advice! The future honey harvest depends on how the bees spend the winter.

Families with poor winters greet spring hungry and weakened. Often in such bee colonies, the queen dies, and various diseases appear.

Winter is the most important and difficult period of time for bees. Since on cold days, they selflessly fight for survival and make every effort to start work in the spring and produce tasty, healthy honey.

How to properly prepare bees for wintering, depending on the modification of the hives

From the correct preparation of bees for wintering depends on their viability in the spring. Preparatory work begins at the end of August, the execution technique directly depends on the type of hive. There are a number of rules for preparing for wintering that beekeepers must follow regardless of the type of hive:

  • inspection of the hive;
  • prevention of diseases;
  • nest formation;
  • strengthening of bee colonies;
  • additional feeding;
  • warming the hive;
  • choose the right area, protected from drafts and precipitation.

Bee houses are installed on pedestals so that they are not flooded when the snow melts. If the apiary is large, the hives are placed in a tight row to reduce the number of wind-blown walls.

Preparing bees for winter in a multi-hive hive

Proper preparation of bees for winter in multi-hull hives is a responsible job, since the health of the family depends on it. On frosty days, bees are inactive, so movement to the side is difficult. It is easier for them to move strictly upward, towards the food heated by the air flow, bypassing all the partitions. Therefore, even small families will better endure the winter in a double-hive hive.

Prepare for wintering immediately after the main bribe. For this:

  • leave light brown frames, since the queen bee is more willing to lay eggs in them;
  • the sugared honey is removed from the hive;
  • discard old, unusable honeycombs;
  • 2 tiers are left: the lower one for the nest, the upper one for food supplies.

Before the onset of cold weather, it is necessary to correct and arrange the frames. Leave honey and sealed frames. 2 with bee bread are installed along the edges of the upper tier, they will be needed by bees at the end of wintering.

Important! Half-empty frames should not be in a multi-hive hive.

Preparing bees for winter in sunbeds

The main advantage of wintering insects in sunbeds is the small laboriousness of the actions, since there is no need to waste time and effort on rearranging heavy bodies with honey. One person will be able to prepare bees for wintering in sunbeds without additional efforts.

For this:

  • at the end of summer, the hives are moved to fields with late honey plants to feed the bees;
  • after that, the store frames are removed to inspect and determine the state of the bee colonies;
  • since the width of the lounger is large, before the first frosts, they reduce the parameters by reducing the frames on the side of the tray.

Such a procedure will create a kind of passage in which the air will be heated, which will normalize heat and air exchange.

How to prepare a bee colony for wintering in rue hives

Preparing striped workers for wintering in Ruta hives differs from preparatory work in other types of hives. Wintering can be organized in two ways:

  1. In two buildings... To do this, equip a nest on the lower tier, and the upper one will serve as a feeder. The number of honey frames depends on the strength of the family. If there is no stock, then in August they install an empty housing and feed the bees with sugar syrup. Over time, the bees will quickly make up for the missing losses.
  2. In one case... First of all, they limit the space of the nest by installing a thin diaphragm on 2 sides. Next, a piece of polyethylene or canvas is laid on the eyelets, be sure to fold back 1 edge. A rooftop, ceiling, empty tier and roof are installed on top. With the onset of cold weather, the diaphragm is replaced with insulation and the upper notch is closed. For better ventilation, thin strips are distributed under the ceiling for free supply of fresh air.

Features of wintering bees in different types of hives

Preparation for wintering is an important period for the beekeeper, since it depends on him whether the bee colonies will meet the spring or not. The successful outcome depends on the type of hive. The main thing is to choose the one that will meet all the requirements.

Wintering of bees in dadan enclosures

In order for the bees living in the two-body Dadanov hive to enter the winter strong, they must be periodically fed with honey or sugar syrup. They start feeding in the last days of August, especially in the absence of a bribe. According to experienced beekeepers, a healthy, strong family should fill 6 or more Dadanov frames before wintering.

Before assembling the nest, it is necessary to reduce the number of frames so that there is enough food for all family members. Determination of unnecessary frames is carried out during the inspection. The procedure is carried out once a week. At each inspection, remove those frames on which there is no sowing.

After removing the extra frames, they begin to form the nest:

  1. Bilateral - This method is used to prepare large colonies for wintering, which have settled in 10-12 streets. In the middle, set 2-4 frames with honey and bee bread (feed should be about 2 kg). On both sides of the central frames, there are completely honey ones with a feed volume of up to 4 kg. In general, the number of frames should correspond to a food volume of 25 kg.
  2. Angular - the method is intended for a small family who were able to populate 7-9 streets before winter. With this method, a full-fledged honey frame is installed on one side, and the next ones are arranged in descending order. The closing frame should contain about 2 kg of honey. All other honey frames are removed to the storeroom.
  3. Beard - suitable for a weak family. Honey frames are installed in the center, all subsequent ones are in descending order. To provide the bees with food for the whole winter, the supply of honey must be at least 10 kg. In order for the bees to correctly go for food, bars are set perpendicularly for them as a guide.

When bees winter in the wild in hives, the beekeeper is limited in control and assistance to bee colonies. Free wintering has its pros and cons. The pluses include:

  • there are no costs for the construction of a winter house;
  • insects independently carry out a cleaning flight;
  • in the spring they start collecting honey earlier.

Cons of free wintering:

  • there should be a lot of feed, the frames should be 2/3 sealed with honey;
  • the area should be protected from the wind, and the hives should be shaded from direct sunlight;
  • it is necessary to establish protection from birds;
  • weak families in the wild do not spend the winter, so they are moved to stronger ones, through a blind partition.

In beekeeping, there are a large number of types of hives, but beekeepers recommend that beginners send bees for the winter in narrow-framed hives. Since they have many advantages:

  • hives are easy to use;
  • honeycombs are placed in 3 rows and are in one-piece cassettes with frames;
  • they are easy to insert and remove;
  • the hive is equipped with several entrances, which do not allow the accumulation of bees at the entrance;
  • fodder reserves for the winter are located above the family's head;
  • honey stores are located on a long, narrow path, which facilitates the feeding process.

Wintering of bees in multi-body hives

Most beekeepers do not recommend keeping insects in a multi-hive, despite the high honey production. There are several disadvantages of wintering in a multi-hive hive:

  1. Most often, the pestilence of insects occurs at the beginning or at the end of winter due to brood. Because of it, the bees later fly out of the house, bring pollen and nectar out of time, which leads to a shortage of food.
  2. There is a young queen bee in the hives, which was bred shortly before the onset of cold weather.
  3. In a multi-hive hive, the nest quickly overheats.
  4. The hive is often attacked by ticks and mice.

To make wintering comfortable, preparation is carried out at the end of summer: at this time the queen is taken out, and the bees are stocking up for the winter.

Wintering takes place in a 2-tiered hive. At the bottom and top of the lower tier, 8 frames are left. There should be no feed in the lower combs. In the middle of the upper body, up to 2 frames are left, from below they are not completely filled. After the first flight, the bee colony must be fed. If there is enough food, then by the end of wintering the bees will move to the upper body, while the lower one is removed.

In order for insects to feel comfortable all winter, it is necessary to properly assemble the hive. They start work at the beginning of autumn, later it is impossible to carry out, as you can greatly disturb the bees.

The figure shows an option for keeping honey warm and moist. This design will not interfere with the movement of the bee ball. The lower body will be empty, which will help the bees not to suffer from a lack of oxygen. When preparing a hive using this technology, the occurrence of mold and parasites is unlikely, and the bees will not steam up.As the food is absorbed, the bees gradually move to the upper tier, and in the spring they completely empty the lower body.

Wintering of bees in Ruta hives

With proper assembly and proper formation of the nest with an abundance of food, a multi-hull rutovsky hive is an ideal place for wintering. Strong and medium-sized families for the winter are located in 2 buildings, weak ones winter in 1 Ruta hives. In the upper compartment, a squeezed nest is placed on full-sized honeycombs.

When forming a nest, it is necessary to control the number of filled frames. There should be 1 less of them than bee streets. For good heat transfer, Guillaume's barrier boards are placed on 2 sides of the walls. In the lower tier, there are no more than 5 small cells. It is better to store food that is required for wintering in storerooms.

How to organize a warm home:

  1. Insulation and polyethylene are laid on the frames of the upper body. They will serve as a heat cushion.
  2. The upper and slotted notch is opened in order to get rid of carbon dioxide.

Pros and cons of wintering bees in polyurethane foam and PPP hives

New generation materials

Dignity

disadvantages

PPU

the hive is not subject to the process of decay and the formation of mold;

good moisture resistance;

has thermal insulation properties;

long shelf life;

good sound insulation;

easy care;

light weight;

great for large families.

 

it quickly collapses under the influence of direct sunlight;

the house needs painting;

parts must be replaced every 5 years;

due to its low weight, a weighting agent is required;

medium ventilation;

high price.

PPP

bodies of the same size, which allows you to rearrange them in places;

does not absorb moisture;

good ventilation;

the hive is easy to operate.

 

hulls are poorly cleaned of propolis;

when carrying out disinfection, do not use a blowtorch;

water accumulates at the bottom of the hive.

Wintering of bees in sun loungers

The beehive lounger is ideal for beginners. In the loungers, frames can be easily rearranged, removed or added. Winter stocks will be arranged vertically, and the bee ball will be able to consume honey from above.

Only strong families need to have a lounger for the winter in the hive. If the colony is weakened, it will move towards the exit, thereby leaving the feeder behind. For winter to pass without losses, you need to follow the advice of experienced beekeepers:

  1. If the hive has 1 entrance, then the nest is located in the center, if 2, above and below, the nest is located in the middle of the dwelling, if up to 4 notches, the nests are placed along the edges.
  2. To protect against dampness, additional ventilation is made.
  3. It is important to insulate the nest from air and water permeable material.
  4. Mousetraps are installed next to the apiary.
  5. When the winters are cold, the hive is taken to a warm room.
  6. Special wind shields are installed on the front wall.
  7. The hives are regularly cleaned from dead weather, as they reduce the ventilation of the air and the bees suffer from a lack of oxygen.
Important! For the wintering to go well, the bees must be at rest.

At the end of February, the bee family must be fed, since the bee, breaking away from the club in search of food, dies.

Wintering bees in Finnish hives

Wintering in Finnish hives can be carried out in the open air. The houses are lightweight and in case of severe frosts they can be rearranged in a specially prepared, insulated place.

The accumulated condensate flows freely from the bottom, the bottom is closed with a special valve. With the onset of spring days, insects freely begin their spring flight.

Since the structure is highly moisture resistant, dark spots and mold do not appear on the walls of Finnish hives.

Conclusion

Wintering of bees in hives is being improved every year. Recently, different options have been used, especially in multi-body hives. You need to approach wintering with all responsibility: strengthen families, prepare food, if there is a need to patch up cracks and cracks.A properly prepared bee colony is the key to a good wintering.

Give feedback

Garden

Flowers

Construction